How Can I Connect My Hp Printer to Wifi Again

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

HP printers - Wi-Fi connection is lost later on router or network settings change

Reconnect a previously installed printer to the Wi-Fi network if you lot purchased a new router, changed your Net Service Provider (Internet access provider), or changed your network name and password.

Connect a printer with a touchscreen control panel

Use the printer control panel to connect your printer to your network.

Connect the printer to the Wi-Fi network (printers with a touchscreen)

Use the Wireless Setup Wizard from the printer control console to connect the printer to your Wi-Fi network.

Place the printer near the network router.
Brand sure paper is loaded in the main tray, and then turn on the printer.
From the Wireless or Setup menu, select Network setup or Settings, and and so select Restore Network Settings.
From the Setup, Network, or Wireless settings card, select Wireless Setup Wizard.
Select your network, and and so enter the countersign.

Annotation:

If the Wireless Setup Wizard is not listed, select Wi-Fi Protected Setup or WPS, select Push Push, and then follow the steps to connect to the network.

Print a Wireless Network Test Written report

Impress a Wireless Network Exam Report to find information about your printer network connection or to troubleshoot connexion bug.

Print a Wireless Network Exam Report:
Review the information on the report, then follow any instructions provided to troubleshoot connectivity issues.

Connect a printer without a touchscreen control console

For printers without a brandish, utilise Wi-Fi Protected Setup (WPS), HP Smart, or temporarily connect a USB cable to ready the Wi-Fi connection.

If one method does not work, try some other method.

Connect the printer using the HP Smart app

Restore Wi-Fi setup way on the printer, and so utilise HP Smart to connect the printer to your Wi-Fi network.

Restore Wi-Fi setup fashion on the printer

Prepare a printer for a Wi-Fi connection by restoring Wi-Fi setup mode.

When the settings are restored, the printer enters Wi-Fi setup fashion for about two hours, making it discoverable during the HP software installation.

Virtually printers with a touchscreen: From the Wireless or Setup bill of fare, select Network setup or Settings, so select Restore Network Settings.
Nearly inkjet printers without a touchscreen: Press and concord the Wireless and Abolish buttons until the Power button flashes, and and so expect for the Wireless light to wink.
Well-nigh Laser printers without a touchscreen or control panel menu: Printing and concord the Wireless button until the Attention and Ability lights flash, or press and hold the Wireless and Cancel buttons until the Wireless low-cal flashes (Laser NS, Neverstop). The printer might restart.
Well-nigh LaserJet printers without a touchscreen: Press and hold the Wireless button until the Attention light flashes, and then look for the Wireless low-cal to wink.
Envy 6000, 6000e, 6400e, ENVY Pro 6400, DeskJet Plus IA 6000, 6400, and Tango printers: Press and hold the Wireless push on the back of the printer for five seconds until the Status light flashes (blue or purple depending on the model).

Go to Restore Wi-Fi setup mode on your HP printer for additional information and button presses for more than printer models.

Install HP Smart

Install the HP Smart app on your estimator or mobile device.

Do the post-obit if you are setting upward the printer on a Wi-Fi network.

Place the printer and the calculator or mobile device near the Wi-Fi router.
Turn on Wi-Fi on your computer or mobile device and connect to your network. If the estimator is continued to the network with an Ethernet cable, temporarily disconnect the cable and utilise the Wi-Fi connection during the setup.
Enable Bluetooth on the computer or mobile device so that HP Smart can notice the printer during the setup.
After installing HP Smart for iOS and Android, enable the mobile device location service and allow the app to utilise your location to detect the printer and offer solutions during setup.

If you are prompted to sign in with Microsoft to use the app across devices, you tin sign in or click No, thanks to proceed.

Notation:

Disconnect from a Virtual Individual Network (VPN) connection before downloading.
If you lot are setting up HP Smart for the beginning time, yous must create or sign in to an HP account to admission all printer functions.
In HP Smart, click Add Printer or the plus sign to search for the printer, and then follow the instructions to complete the setup.

Connect the printer using Wi-Fi Protected Setup (printers without a touchscreen)

Use the Wi-Fi Protected Setup (WPS) push button on your router to connect the printer to your Wi-Fi network.

Place the printer near the Wi-Fi router.
Put the printer in WPS connexion mode.
- Most printers without a touchscreen control panel: Press and concord the Wireless button for five seconds or until the wireless light starts to wink.
- HP Deskjet 6000 and 6400, Green-eyed 6000 and 6400, and Tango printers: Press and agree the Wi-Fi button and the Power button on the back of the printer for 5 seconds until the blueish bar flashes.
Within ii minutes, printing and hold the WPS button on the router until the connection process begins.
Wait for the Wireless light or bar on the printer to stop flashing. The printer is now connected to the network.

Connect with the full-feature driver using a temporary USB connection

Install the full-feature HP print driver, which includes HP Printer Assistant (Windows) and HP Utility (Mac) software, to connect the printer to your Wi-Fi network using a temporary USB connectedness.

Note:

HP Tango printers practice not support setting upward a Wi-Fi connection with a USB cable.

Connect the printer with a temporary USB connection (Windows)

Use HP Printer Assistant software, which comes with the full characteristic HP drivers, to connect the printer to the network past temporarily using a USB cablevision connection to transfer Wi-Fi settings.

Search Windows for your printer model name and number, and and then click your printer from the list of results to open HP Printer Assistant.

Note:

If the printer does non display in the search results, go to HP Software and Commuter Downloads to download and install the full feature software and drivers.
Click the Utilities tab.
Click Printer Setup & Software, then click Reconfigure Wireless Settings.
Follow the instructions to change the wireless settings.
When prompted, connect the USB cable and type the WEP or WPA key (network password).

Connect the printer with a temporary USB connectedness (Mac)

Use HP Utility software, which comes with the full feature HP drivers, to connect the printer to the network by temporarily using a USB cablevision connection to configure Wi-Fi settings.

Connect a USB cable to the USB port on the rear of the printer and to the computer.
Click the Apple tree icon , and then click System Preferences.
Depending on your operating system version, click Impress & Browse or Printers & Scanners.
Click the plus icon , and then click Add Printer or Scanner.
Click the proper name of your printer with USB as the Kind.
Select your printer from the Apply or Impress Using menu, and then click Add.
Click your printer proper name, and and then click .
In HP Utility, click Wireless Setup.
Check if your network name displays in the Confirm Wireless Settings window.
- If your network name displays, click Continue, and so click Done.
- If your network proper name does not display, select No, I desire to choose another network, click Continue, select your network name and enter the password, click Go on, and so click Washed.
Disconnect the USB cable from the printer and the computer, and then wait for the printer to connect to the network. The wireless light on the control panel turns on solid when the connection completes.
In the Printers & Scanners or Print & Browse window, click the name of your printer, then click the minus icon to delete the USB installed printer.
Click the plus icon, and then click Add Printer or Scanner.
Click the name of your printer with Bonjour listed as the Kind, click the Use or Print Using menu, and and so select the name of your printer in the pop-up carte.
Click Add to complete the setup.